For this project, you will need:
A printed iron on transfer (printable at the bottom of this post)
A small piece of cotton duck cloth (at least the size of your transfer)
An 8 inch zipper
If you let it completely cool, it will peel off much easier.
Trim out the images giving about a 1/2 inch seam allowance.
I trimmed mine out with shears to prevent fraying.
After each side is together on the zipper, pin them together along one side. Make sure to keep an eye on the print so that it's lined up properly and pin so you sew just inside the edge of the printed portion.
After you sew one side, do the bottom, unzip the zipper, then sew up the third side.
(click to enlarge & save)
If you have time, I'd love a visit over on my blog at The Shabby Creek Cottage.
Happy New Year!